W110Fujitsu ScanSnap iX1600

Fix Fujitsu ScanSnap iX1600 Error W110: Connection Issues

The W110 error code on your Fujitsu ScanSnap iX1600 indicates a wireless connectivity issue, preventing the device from communicating with your network. This often happens due to Wi-Fi security changes or router resets. Follow these steps to restore your connection.

1 views

Common causes

  • 1Updated Wi-Fi password in the network.
  • 2Scanner positioned outside of stable Wi-Fi range.
  • 3IP address conflict on the local network.

Solutions

Network Power Cycle

  1. Turn off the scanner and the router for at least 30 seconds.
  2. Power up the router first and wait for the connection to stabilize.
  3. Turn on the scanner and check for network detection.

ScanSnap Home Reconfiguration

  1. Launch ScanSnap Home on your workstation.
  2. Go to device settings and select 'Wireless Setup'.
  3. Follow the guided steps to re-link your Wi-Fi credentials.

Steps to follow

  1. 1

    Navigate to Settings

    Use the touch panel on the iX1600 to find the setup menu.

  2. 2

    Wi-Fi Options

    Tap on Wi-Fi settings and select your network from the list.

  3. 3

    Confirm Connection

    Input the security key and wait for the status icon to appear.

Frequently asked questions

It is a network-side connectivity error showing that the device is offline.

No, if you switch to USB mode, the scanning functionality will still work.

Yes, you can configure a static IP via ScanSnap Home for more network stability.

Fix Fujitsu ScanSnap iX1600 Error W110: Connection Issues | Vimazdev