W-05WorkForce Pro WT-C5890

Epson WorkForce Pro WT-C5890 error W-05: Output jam

The Epson WorkForce Pro WT-C5890 error W-05 means there is a blockage in the paper exit path. If you are wondering why does my printer show error W-05, it is usually because printed sheets are not clearing the sensor as expected.

1 views

Common causes

  • 1Overloaded output tray.
  • 2Adhesive blockage.
  • 3Exit sensor alignment failure.
  • 4Roller wear.

Solutions

Diagnóstico rápido

Error W-05 triggers when the exit sensor doesn't toggle correctly after the print process.

Solución paso a paso

  1. Inspect the rear door and front output tray.
  2. Pull out any crumpled or jammed pages.
  3. Make sure no stickers are obstructing the rollers.
  4. Close the unit to reset.

Prevención y mantenimiento

Clear the output tray periodically. Avoid thick cardstock that doesn't bend well in the output path.

Cuándo llamar a un técnico

If the path is clear and the error persists, the exit sensor may be broken.

Ficha técnica del equipo

Steps to follow

  1. 1

    Check

    Inspect the exit tray and rear door.

  2. 2

    Clear

    Remove any paper blocking the exit.

  3. 3

    Reset

    Ensure doors are closed securely.

Frequently asked questions

The printer detects that a page hasn't cleared the exit sensor.

It needs immediate clearing to prevent further paper damage.

Use standard bond paper within recommended weights.

Do not overload the output tray.