w-03EcoTank L1300

Epson EcoTank L1300 Error W-03: Exit Jam

The Epson EcoTank L1300 error W-03 indicates that a document has failed to exit the printer correctly, triggering a jam alert in the rear exit area. Troubleshooting the W-03 error on the Epson EcoTank L1300 is straightforward and involves verifying the paper path. Ensure that no obstacles block the exit, which can cause paper curling and subsequent jamming.

1 views

Common causes

  • 1Insufficient room behind the printer.
  • 2Curled paper due to humidity.
  • 3Worn exit rollers.
  • 4Paper stock too thick.

Solutions

Quick Diagnostics

The W-03 is easy to spot—check the rear output tray for any paper that is partially stuck or deformed.

Step-by-Step Solution

  1. Check Exit: Ensure nothing is blocking the paper exit.
  2. Clear: Pull the paper gently to remove it.
  3. Power Cycle: Reset the printer to clear the warning.

Prevention and Maintenance

Make sure the printer is not pushed tightly against a wall; output paper needs space to move freely.

When to Call a Technician

If the error repeats with perfectly flat paper, the exit rollers are likely worn and require maintenance.

Device Technical Specifications

  • Technology: InkTank
  • Format: A3+
  • Connectivity: USB
  • Capacity: 100 pages
  • Consumable: T664 series
  • Use: Printing
  • Support

Steps to follow

  1. 1

    Check Exit

    Look at the rear output area for jammed paper.

  2. 2

    Clear Obstruction

    Gently pull the jammed sheet out.

  3. 3

    Power Cycle

    Turn the printer off and on to clear the error.

Frequently asked questions

The W-03 error is a paper jam alert at the exit path of the printer.

Ensure enough space behind the printer for the paper to exit without curling.

T664 series ink.

No, it's a mechanical transport issue, usually resolved by clearing the path.