W-01WorkForce Pro WT-C5890

Epson WorkForce Pro WT-C5890 error W-01: Paper jam fix

The Epson WorkForce Pro WT-C5890 error W-01 is triggered when the printer detects a paper jam or feeding issue. If you are asking why does my printer show error W-01, it is usually due to misaligned paper or dirty rollers in the input feed path.

1 views

Common causes

  • 1Paper weight exceeding specifications.
  • 2Dirty pickup rollers.
  • 3Misaligned paper side guides.
  • 4Debris inside the input feed path.

Solutions

Diagnóstico rápido

Error W-01 is an indicator that paper is not advancing correctly or is trapped near the input rollers.

Solución paso a paso

  1. Take all paper out of the tray.
  2. Look inside the feed area for small scraps or obstructions.
  3. Verify the paper guides are perfectly snug against the stack.
  4. Slide the tray back in and press the reset button on the interface.

Prevención y mantenimiento

Clean feed rollers every 3 months. Do not exceed the 500-sheet capacity. Ensure paper is dry and wrinkle-free.

Cuándo llamar a un técnico

If the error repeats despite no paper being visible, the internal sensor may be malfunctioning.

Ficha técnica del equipo

  • Technology: PrecisionCore inkjet.
  • Performance: Up to 25 ipm mono.
  • Connectivity: Wireless, Ethernet, USB.
  • Feeding: 500-sheet input tray.
  • Compatible consumables: T11 series ink packs.
  • Recommended use: Mid-to-high volume business.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check Tray

    Remove the paper tray to inspect the input area.

  2. 2

    Clear Jam

    Gently remove any trapped sheets.

  3. 3

    Reset

    Close all compartments to initiate the auto-reset.

Frequently asked questions

It means the paper sensor is triggered by an obstruction or improper loading.

It is a standard paper jam alert, not a mechanical failure.

64-90 g/m2 bond paper is ideal.

Always align the side guides and don't overfill the tray.

Epson WorkForce Pro WT-C5890 error W-01: Paper jam fix | Vimazdev