w-01EcoTank L4260

Epson EcoTank L4260 error W-01: Ink Pad Reset

The Epson EcoTank L4260 error W-01 is an alert notifying the user that the ink pad absorption unit is full. The printer disables all functions to prevent waste ink leakage that could damage delicate electronic components. Professional service is required to replace the pads and clear the internal error log safely.

1 views

Common causes

  • 1Normal ink pad saturation due to high page count.
  • 2Frequent usage of automatic cleaning utilities.
  • 3End of service life component threshold exceeded.
  • 4Internal ink accumulation exceeding factory limits.

Solutions

Diagnóstico rápido

Look for the error message on the control panel. If it says 'ink pads at end of service life', it confirms the need for a hardware reset and replacement.

Solución paso a paso

  1. Stop Printing: Immediately cease operations to avoid potential leaks.
  2. Authorized Service: Find a local Epson-certified service center to replace the pads.
  3. Counter Reset: Technicians will use official software to reset the internal protection counter.
  4. Routine Check: Ensure the unit is clean and ready for continued use after service.

Prevención y mantenimiento

Excessive automatic head cleanings accelerate the filling of these pads. Run head cleaning only when print quality clearly suffers. Always use original ink series 104 to keep the system running efficiently and cleanly.

Cuándo llamar a un técnico

This error is a hard stop. Do not try to bypass the counter manually, as an overflowing ink pad can create a hazardous mess and damage the logic board.

Ficha técnica del equipo

  • Technology: Inkjet (EcoTank)
  • Speed: Up to 33 ppm
  • Connectivity: Wi-Fi / Wi-Fi Direct / USB
  • Capacity: 150 sheets
  • Consumable: 104 series ink bottles
  • Recommended Use: Home/SOHO
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Seek Professional Help

    The ink pad unit must be replaced and the counter reset by an authorized technician.

  2. 2

    Check for Ink Spillage

    Inspect the rear waste area for leaks.

  3. 3

    Avoid Unofficial Software

    Do not use unauthorized reset tools as they can permanently brick the device.

Frequently asked questions

This code signifies that the absorbent waste ink pads inside your printer have reached their saturation limit.

It is a safety feature that locks the printer to prevent internal damage or leakage of waste ink.

Stick to the 104 ink series to ensure cleaner printer operation.

Reduce the number of unnecessary automatic cleaning cycles.

Epson EcoTank L4260 error W-01: Ink Pad Reset | Vimazdev