w-0002SureLab D1070

Epson SureLab D1070 Error W-0002: Ink Issue

The Epson SureLab D1070 error W-0002 alerts the user that an ink cartridge is empty or not correctly seated. This is a standard warning for high-output environments where frequent cartridge changes are normal. Follow these steps to diagnose and clear the W-0002 warning effectively.

1 views

Common causes

  • 1Dirty ink chip contacts.
  • 2Empty cartridge.
  • 3Loose cartridge seating.
  • 4Internal logic error.

Solutions

Diagnóstico rápido

Look for the flashing ink drop icon on the screen. If the error persists after swapping, the issue is likely with the chip contacts on the ink pack.

Solución paso a paso

  1. Identify the problematic color from the menu.
  2. Open the side compartment and remove the specific cartridge.
  3. Use a lint-free cloth to clean the electrical contacts on the chip.
  4. Reinsert the cartridge firmly until it snaps into place.

Prevención y mantenimiento

Avoid changing cartridges while a print job is in progress. Ensure regular cleaning of the ink tray area.

Cuándo llamar a un técnico

If the W-0002 error appears for multiple colors despite cleaning, the reader terminal may need repair.

Ficha técnica del equipo

  • Technology: Photo printer.
  • Speed: 460 prints/h.
  • Connectivity: Wi-Fi, Ethernet, USB.
  • Capacity: High.
  • Compatible supplies: D6r-S inks.
  • Usage: Professional lab.
  • Download drivers

Steps to follow

  1. 1

    Open ink door

    Access the side panel for cartridges.

  2. 2

    Reseat cartridge

    Remove the faulty cartridge and reinsert it firmly.

  3. 3

    Check status

    Verify the screen shows the new ink level.

Frequently asked questions

It is an ink supply warning, either low level or bad cartridge detection.

You should address it soon to avoid production downtime.

Using genuine inks ensures quality and machine warranty.

Check the ink levels regularly through the printer control panel.