w-0002SureColor S60600L

Epson SureColor S60600L Error W-0002: Low Ink Alert

The epson surecolor s60600l error w-0002 is an informational warning indicating that one of your ink pouches is running low on supply. Unlike fatal system errors, this prompt is designed to help users prepare for a cartridge change without interrupting the current print process immediately. It is an essential part of routine supply management for high-production printers.

1 views

Common causes

  • 1Low ink: pouch volume is below 15%.
  • 2Chip error: data chip is faulty.
  • 3Loose connection: pouch not fully seated in the holder.
  • 4Sensor fault: reading system failure.

Solutions

Quick Diagnosis

This code is a preventative measure. Look at the printer display to identify which ink channel is signaling low levels and have a replacement ready.

Step-by-Step Solution

  1. Check the ink status display to identify the empty channel.
  2. Open the target ink compartment on the machine.
  3. Remove the depleted pouch from the slot.
  4. Insert the new genuine Epson ink pouch.
  5. Confirm that the printer automatically recognizes the new ink levels.

Prevention and Maintenance

Maintain a small inventory of original ink pouches to avoid printing downtime. Ensure you are using genuine Epson consumables to maintain sensor accuracy.

When to Call a Technician

If the warning doesn't clear after you've inserted a new, full pouch, the chip reader or local ink supply module may have failed.

Equipment Technical Data

  • Technology: Wide Format Solvent Printer
  • Speed: Up to 95 sqm/hr
  • Ink: UltraChrome GS3
  • Supply capacity: 1.5L per pouch
  • Usage: Commercial Signage
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open compartment

    Access the ink slot indicated on the panel.

  2. 2

    Remove pouch

    Pull out the empty or low ink pouch.

  3. 3

    Install new

    Insert the new pouch until it clicks into place.

Frequently asked questions

W-0002 is a low-level warning that allows you to finish your current job before the ink runs out.

UltraChrome GS3 high-capacity 1.5-liter ink pouches.

Using third-party ink is not recommended, as it can cause head failures and void your warranty.

Check the control panel under the 'Consumables Status' menu.