unable-to-print-35MFC-J805DW

Brother MFC-J805DW unable-to-print-35 error: Fix

The Brother MFC-J805DW unable-to-print-35 error is a common notification signaling a printhead movement obstruction. This code occurs when the internal sensor detects the carriage cannot move smoothly. You should carefully check the internal rail for paper jams.

1 views

Common causes

  • 1Debris or paper scrap blocking the printhead path.
  • 2Contaminated encoder strip causing incorrect position readings.
  • 3Worn carriage motor due to excessive use.
  • 4Sensor failure preventing home position detection.

Solutions

Diagnóstico rápido

The error appears on the LCD. Check if the printhead carriage is locked at either side. If you hear grinding noises, it confirms a physical obstruction.

Solución paso a paso

  1. Unplug the printer for 30 seconds.
  2. Open the main cover and gently slide the printhead to the middle.
  3. Remove any paper scraps or debris found on the rail.
  4. Clean the encoder strip with a lint-free cloth if dirty.

Prevención y mantenimiento

Clean the carriage area monthly. Limit print jobs to 50 pages to reduce mechanical stress. Use genuine ink to prevent nozzle clogging.

Cuándo llamar a un técnico

If the error remains after cleaning the rail, it may indicate a motor failure requiring professional service.

Ficha técnica del equipo

  • Technology: Inkjet.
  • Speed: 12 ppm (mono) / 10 ppm (color).
  • Connectivity: Wi-Fi, USB.
  • Capacity: 150 sheets.
  • Compatible Consumables: LC3033 / LC3035 cartridges.
  • Recommended Use: Home office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Unplug the device to ensure safety while inspecting the printhead.

  2. 2

    Open cover

    Lift the main cover to access the printhead assembly.

  3. 3

    Remove obstructions

    Check for paper scraps along the rail.

Frequently asked questions

This error means the printhead is physically blocked or cannot move along its path.

It is a mechanical jam that prevents printing, usually resolved by clearing the obstacle.

It uses the INKvestment Tank series LC3033/LC3035.

Keep the printer free of dust and avoid loading over-thickness paper.

Brother MFC-J805DW unable-to-print-35 error: Fix | Vimazdev