u2fi-7160c

Fujitsu fi-7160C error U2: Feed failure fix

The Fujitsu fi-7160C error U2 indicates an issue with the document feeder picking up pages. This is usually due to dust, debris, or misaligned documents in the tray. This maintenance guide explains how to clear the feed path.

1 views

Common causes

1Dirty rollers
2Paper jam
3ADF overload
4Worn rubber friction

Solutions

Quick Diagnosis

If your scanner stops with U2, check the tray for bent pages or staples. Debris often accumulates on the rollers preventing proper feed cycles.

Step-by-Step Solution

Clear the paper tray.
Open the top ADF cover.
Wipe rollers with official cleaning wipes.
Align guides to document width.
Reset and re-scan.

Maintenance

Run a cleaning sheet weekly. Replace rollers if friction surfaces look shiny or smooth.

When to Call a Technician

If paper feed continues to fail after a thorough cleaning, the internal gear assembly may be damaged.

Technical Specifications

Technology: Duplex Scanner
Speed: 60 ppm
Connectivity: USB 3.0
Consumable: Roller Kit
Usage: High Volume
Official Drivers / Firmware

Steps to follow

1
Open ADF
Release the ADF cover.
2
Clean
Wipe rollers with cloth.
3
Restart
Close and retry scanning.

Frequently asked questions

It is an ADF feed error indicating the scanner failed to pick up a sheet correctly.

Routine maintenance prevents damage, but ignoring jams can harm ADF sensors.

Always use genuine Fujitsu roller replacement kits.

Cleaning every 5,000 pages is best practice.