Tape Jam / Cover OpenLW-600P

Fixing Tape Jam and Cover Errors on Epson LW-600P

A tape jam or cover open error typically stops the Epson LW-600P from functioning to prevent hardware damage. This issue is usually related to physical obstruction within the tape compartment. Regular maintenance can prevent this from recurring.

0 views

Common causes

  • 1Tangled tape inside the cartridge.
  • 2Debris buildup on the cutter mechanism.
  • 3Improper cassette seating within the compartment.

Solutions

Inspecting the Print Path

  1. Open the lid and remove the tape cassette.
  2. Examine the print head for residual adhesive or stuck tape fragments.
  3. Carefully remove any loose material with tweezers.

Resetting the Cover Sensor

  1. Ensure the hinge is free of debris.
  2. Snap the cover shut completely.
  3. Check if the internal sensor tab is properly engaging when closed.

Steps to follow

  1. 1

    Power Off

    Turn off the printer before starting the cleaning process.

  2. 2

    Cassette Check

    Remove the cassette and wind the tension gear manually to remove any slack.

  3. 3

    Clean Head

    Use a lint-free swab with isopropyl alcohol to gently wipe the thermal print head.

Frequently asked questions

Using third-party tapes can lead to jamming or adhesive buildup, which might trigger this error.

If the error continues, the cover sensor might be damaged. Contact technical support for further evaluation.

No, always use isopropyl alcohol. Water can cause corrosion on the sensitive electronics.

Fixing Tape Jam and Cover Errors on Epson LW-600P | Vimazdev