tape-errorLW-600P

Epson LW-600P Tape Error: Fix Guide

The Epson LW-600P error tape error indicates that the label maker has failed to detect the tape movement or the ribbon is wrinkled. This is a common issue that can usually be resolved by manually tensioning the cartridge tape. The LW-600P is a highly flexible label printer for home and office.

1 views

Common causes

  • 1Improper cartridge installation.
  • 2Tape slack inside the cassette.
  • 3Debris blocking the label exit.
  • 4Defective cartridge ink ribbon.

Solutions

Quick Diagnosis

If the status LED turns red, look for visible tape jamming or excessive slack in the tape exit path.

Step-by-Step Solution

  1. Open cover: Open the rear cover of the printer.
  2. Remove cartridge: Take out the tape cartridge and inspect for snags.
  3. Rewind tape: Manually tension the tape by turning the spool.
  4. Test: Reinsert and perform a test print.

Prevention and Maintenance

Do not pull labels out forcefully. Store cartridges in cool areas and use only genuine consumables.

When to Call a Technician

If the drive motor makes a loud clicking noise and no tape moves, hardware repair is needed.

Device Technical Data

  • Technology: Thermal Transfer
  • Resolution: 180 dpi
  • Connectivity: Bluetooth, USB
  • Max Tape: 24mm
  • Compatible Consumables: Epson LC series
  • Use Case: Office organization
  • Official support

Steps to follow

  1. 1

    Open cover

    Open the rear cover of the printer.

  2. 2

    Remove cartridge

    Take out the tape cartridge and inspect for snags.

  3. 3

    Rewind tape

    Manually tension the tape by turning the spool.

  4. 4

    Test

    Reinsert and perform a test print.

Frequently asked questions

It usually happens when the internal tape is loose or jammed.

Yes, printing will be disabled until the cartridge is cleared.

Uses Epson LC tapes from 6mm up to 24mm.

Keep the printhead area clean and avoid touching it directly.

Epson LW-600P Tape Error: Fix Guide | Vimazdev