sc672-01im-c1500

Ricoh IM C1500 error SC672-01: Startup Failure

The Ricoh IM C1500 error SC672-01 is an internal system communication error occurring during the startup phase. When the printer initializes, it needs to verify all modules; if this handshake fails, the SC672-01 code is generated.

1 views

Common causes

  • 1Main controller board failure
  • 2Firmware corruption
  • 3Power stability issues
  • 4Peripheral conflict

Solutions

Diagnóstico rápido

If you see SC672-01, the system is hung at initialization. The main controller is not receiving responses from sub-boards.

Solución paso a paso

  1. Power Cycle: Turn off and leave unplugged for 5 minutes.
  2. Disconnect: Unplug all USB devices or external network cables.
  3. Initialize: Power on and see if it completes the loading bar.

Prevención y mantenimiento

Maintain consistent power with a good-quality UPS to prevent startup corruption.

Cuándo llamar a un técnico

If the machine consistently hangs at boot with this code, the controller card or the BICU board likely needs professional replacement.

Ficha técnica del equipo

  • Technology: Laser
  • Speed: 15 ppm
  • Connectivity: Ethernet/USB
  • Compatible Consumables: Ricoh IM C series
  • Recommended Use: Office
  • Official drivers / firmware

Frequently asked questions

This code represents a system controller startup error where the printer cannot initialize communication between the main boards.

A power cycle may work, but consistent recurrence points to a hardware issue.

No, this is a logic/processor related error.

When the error prevents the printer from ever reaching the ready screen.

Ricoh IM C1500 error SC672-01: Startup Failure | Vimazdev