sc670-00IM C400F

Ricoh IM C400F error SC670-00: Startup Diagnostics

The Ricoh IM C400F error SC670-00 is a controller initialization problem. It indicates a failure in communication between internal modules during startup. This is a critical fault preventing the machine from reaching the 'Ready' state.

1 views

Common causes

  • 1BICU to engine communication failure.
  • 2Voltage surge affecting memory.
  • 3Corrupt firmware.
  • 4Internal cable loose connection.

Solutions

Diagnóstico rápido

If the machine hangs on the logo, the control board failed to handshake with its peripherals.

Solución paso a paso

  1. Power down: Turn off and unplug completely.
  2. Wait: Allow capacitors to discharge for 10 mins.
  3. Restart: Reconnect and power on.
  4. Update: Reflash firmware if the error recurs.

Prevención y mantenimiento

Use a surge protector for the printer. Schedule annual firmware check-ups. Original toner prevents dust from contaminating boards.

Cuándo llamar a un técnico

If the SC670-00 persists, the BICU board is likely physically faulty.

Ficha técnica del equipo

  • Technology: Color Laser
  • Consumables: IM C400F Series
  • Connectivity: USB, LAN, NFC
  • Speed: 43 ppm
  • Usage: Corporate
  • Official drivers

Steps to follow

  1. 1

    Reset

    Power off and unplug for 10 mins.

  2. 2

    Check

    Inspect internal connections.

  3. 3

    Update

    Reflash firmware if needed.

Frequently asked questions

Failure to communicate between controller and panel.

Often a power glitch, requires restart.

Genuine IM C400F toner.

Annual check-up recommended.