sc551-00SP 220Nw

Ricoh SP 220Nw error SC551-00: Fuser Temp Failure

The Ricoh SP 220Nw error SC551-00 is a fuser error indicating that the thermostat has detected an out-of-range temperature. Unlike other errors, the SC551-00 is a safety lock, preventing the equipment from operating to avoid potential overheating hazards.

1 views

Common causes

  • 1Thermal fault: Thermostat blew due to intense usage.
  • 2Overheating: Using incorrect paper media.
  • 3Debris: Pressure roller contaminated with residue.
  • 4Aging: Fuser assembly reached end of life.

Solutions

Diagnóstico rápido

If the printer fails to warm up and displays SC551-00 on startup, the safety thermostat has triggered due to a thermal fault.

Solución paso a paso

  1. Deep Cool: Unplug and leave it to cool for 30 minutes.
  2. Paper Check: Avoid labels or thick stock that retain heat.
  3. Power Cycle: Use a direct power source without overloading strips.

Prevención y mantenimiento

Avoid printing heavy black coverage continuously as this causes rapid heat spikes in the fuser assembly.

Cuándo llamar a un técnico

If the error returns immediately upon power-up, the thermal safety component needs professional replacement.

Ficha técnica del equipo

Steps to follow

  1. 1

    Deep Cool

    Unplug and leave it to cool for 30 minutes.

  2. 2

    Paper Check

    Avoid labels or thick stock that retain heat.

  3. 3

    Power Cycle

    Use a direct power source without overloading strips.

Frequently asked questions

The fuser thermostat has detected an abnormal temperature, locking the printer for safety.

No, the printer locks out to prevent potential fire hazards.

It uses SP 201 toner. The error is related to fuser hardware, not the toner cartridge.

Stay within the recommended monthly volume and avoid heavy paper stocks.