sc545MP 2003L

Error SC545 Ricoh MP 2003L: Fuser solution

The Ricoh MP 2003L error SC545 indicates an overheating condition in the fuser unit. This security code is triggered when thermistors detect a temperature out of range, locking the machine to prevent further damage. It is a common failure after intensive use.

0 views

Common causes

  • 1Thermistor failure: Wrong reading of actual temperature.
  • 2Heat roller: Teflon wear causing localized overheating.
  • 3Lamp failure: Heating lamp stuck in 'on' position.
  • 4Voltage: Electrical fluctuations affecting fuser heating.

Solutions

Quick Diagnosis

SC545 is a temperature error. Do not repeatedly try to force-start the device.

Step-by-Step Solution

  1. Cooling: Turn off the machine and wait at least 20 minutes.
  2. Inspection: Check that no paper jam is blocking heat in the fuser.
  3. Reset: Enter service mode (SP) to clear the error code.

Maintenance and Prevention

Perform preventive maintenance on the fuser unit every 80,000 copies.

When to call a technician

If the SC545 code reappears after attempting to reset, the thermistor or heat roller is likely damaged.

Technical Data

  • Model: MP 2003L
  • Technology: Laser Copier
  • Consumable: Ricoh MP 2001 Toner
  • Link: Drivers

Frequently asked questions

Yes, it requires technical service intervention if resetting does not fix it.

It is done via service codes (SP 5-810).

Compatible Ricoh MP 2001 toner series.

Clean the equipment regularly and avoid obstructions.