sc545mp-173

Ricoh MP 173 Error SC545: Fuser Unit Fault

The Ricoh MP 173 error SC545 is a high-level service code indicating a fuser overheating fault. The printer enters a shutdown state to ensure safety. This typically involves the thermistor or the heat controller board detecting temperatures exceeding safe operating limits.

1 views

Common causes

  • 1Failing thermostat failing to regulate heat.
  • 2Burned out fuser heater lamp.
  • 3Accumulated debris blocking the heat sensors.
  • 4Board-level power fluctuation.

Solutions

Diagnóstico rápido

The SC545 error usually points to a thermal runaway condition or a failure of the heater lamp regulation. If it clears only temporarily, internal hardware inspection is needed.

Solución paso a paso

  1. Power down: Shut off the unit entirely.
  2. Inspect fuser: Open the side cover to verify hardware integrity.
  3. Call professional: Resetting requires service mode entry.
  4. Check thermal path: Ensure the fuser is free of debris.

Prevención y mantenimiento

Use original toners to ensure smooth print delivery. Preventive maintenance every 60k prints will keep the fuser in optimal condition.

Cuándo llamar a un técnico

SC545 is a professional-grade repair code. Avoid tampering with internal electronics to prevent voiding warranties or causing further hardware faults.

Ficha técnica del equipo

  • Technology: Monochrome laser multifunction
  • Speed: 17 ppm
  • Connectivity: USB, Optional Ethernet
  • Capacity: 250 sheet tray
  • Compatible Consumable: Ricoh MP 173/MP 201 toner
  • Recommended Use: Home office / Small business
  • Drivers / Support

Steps to follow

  1. 1

    Power down

    Unplug the copier to safely cool down the fuser module.

  2. 2

    Check for obstructions

    Open the side panel and inspect the fuser for paper debris.

  3. 3

    Technical service reset

    The error requires a service mode reset via the SP code performed by a technician.

Frequently asked questions

The SC545 code indicates a fuser overheating failure; the machine cannot maintain a safe temperature range.

No, doing so may cause a fire hazard or internal damage. Always wait for technical assistance.

Using inferior toner can lead to buildup within the fuser, triggering overheating sensors.

Ensure your copier undergoes regular preventive maintenance every 60,000 prints.

Ricoh MP 173 Error SC545: Fuser Unit Fault | Vimazdev