sc543IM C300F

Ricoh IM C300F Error SC543: Fuser Failure

The Ricoh IM C300F error SC543 is a service call indicating a failure in the fuser unit's heating cycle. As a critical failure, the device disables itself to protect the hardware, requiring a professional reset.

0 views

Common causes

  • 1Open lamp heater
  • 2Defective thermistor
  • 3Relay damage
  • 4Voltage surge impact

Solutions

Diagnóstico rápido

This error is triggered when the thermistor detects no temperature rise after startup, signaling a hardware malfunction.

Solución paso a paso

  1. Power off and disconnect for 15 minutes.
  2. Ensure stable electricity supply.
  3. Attempt to power on.
  4. If error SC543 persists, stop and contact support.

Prevención y mantenimiento

Use high-quality power stabilizers. Ensure no adhesive paper enters the feed path.

Cuándo llamar a un técnico

Professional service is strictly required to unlock this error and repair the fuser lamp.

Ficha técnica del equipo

  • Technology: Color Laser MFP
  • Speed: 30 ppm
  • Connectivity: LAN/USB
  • Consumable: IM C300 series
  • Usage: Enterprise
  • Drivers

Frequently asked questions

This is a critical heat safety alert from the fuser.

No, service engineer intervention is mandatory.

Ricoh IM C300 series.

Use a dedicated power circuit.