SC441Ricoh Pro C5300s

Fixing SC441 Error on Ricoh Pro C5300s: Registration Issue

The SC441 error on the Ricoh Pro C5300s indicates that the registration roller failed to reach the 'home' position or there is a synchronization issue during paper feed. This commonly happens when paper jams occur or when the sensors in the feed tray are dusty. Verifying the paper path is essential to prevent mechanical damage.

0 views

Common causes

  • 1Misaligned paper or paper weight not supported by the device.
  • 2Registration sensor contaminated with toner dust or paper scraps.
  • 3Mechanical wear in the feed roller clutch mechanism.

Solutions

Paper Path Inspection

  1. Open the main paper tray and ensure there is no debris.
  2. Remove any jammed paper sheets from the registration roller area.
  3. Confirm that the paper side guides are properly adjusted.

Sensor Cleaning

  1. Use compressed air to clean the registration optical sensors.
  2. Wipe the feed rollers with a soft cloth dampened with isopropyl alcohol.

Steps to follow

  1. 1

    Tray Opening

    Open the paper tray that is originating the error.

  2. 2

    Deep Cleaning

    Clean the rollers with a damp cloth and ensure no obstructions exist.

  3. 3

    Correct Loading

    Align the paper stack correctly and perform a test print.

Frequently asked questions

It may be due to using lightweight paper that wrinkles easily in the registration zone.

Yes, the roller can wear unevenly, leading to permanent jamming issues.

Avoid heavily textured or damp paper, as it affects the sensitivity of the registration sensors.

Fixing SC441 Error on Ricoh Pro C5300s: Registration Issue | Vimazdev