Fix Ricoh M C250FWB SC441-00 Error Code | Transfer Motor
Error SC441-00 signals a lock-up or overcurrent in the transfer belt drive motor on the Ricoh M C250FWB. This happens if the intermediate transfer belt (ITB) experiences physical drag or if paper scraps bind the drive gears.
Common causes
- 1Paper scraps or debris caught in the transfer belt unit.
- 2Misaligned or improperly latched transfer belt unit.
- 3Failed or stalled transfer belt drive motor.
- 4Excessive friction due to worn ITB bearings.
Solutions
Fixing the SC441-00 Transfer Motor Error
When this error is active, paper transport stops to prevent drive gear damage.
Troubleshooting Procedure:
- Inspect ITB Path: Turn off power, open the cover, and inspect the transfer belt assembly for paper scraps or debris.
- Check ITB Seating: Ensure the unit handles and release levers are locked correctly in position.
- Power Cycle: Turn the machine back on to perform an initial rotation test.
Steps to follow
- 1
Turn off power and open side panel
Power off the unit and access the internal compartment holding the transfer belt.
- 2
Remove obstructions and inspect ITB
Verify no paper debris is trapped around the drive gears or inside the belt frame.
- 3
Lock ITB assembly and restart
Re-seat the transfer unit firmly, close all access panels, and switch on the printer.
Videos
Frequently asked questions
No. In many cases, removing a tiny piece of jammed paper or reseating the ITB clears the lock status.
You can turn the drive gear gently by hand to test for smooth movement; never force it if it resists.