sc441-00Aficio MP C4503
Ricoh Aficio MP C4503 error SC441-00: Toner pump repair
The Ricoh Aficio MP C4503 error SC441-00 points to a failure in the toner supply motor. When the machine detects that toner is not reaching the developing unit, it pauses printing to prevent unit damage.
2 views
Common causes
- 1Caked toner blocking the pump.
- 2Toner supply motor burnout.
- 3Path obstruction.
- 4Toner sensor calibration loss.
Solutions
Diagnóstico rápido
If you see white streaks or low color density followed by SC441-00, the toner flow is restricted. Check if the toner cartridge's internal agitator is jammed.Solución paso a paso
- Inspect: Remove the problematic toner cartridge.
- Clear: Clean the supply area for residual buildup.
- Test: Run the toner pump motor test via SP 5-804.
- Reset: Reinstall high-quality toner and power cycle.
Prevención y mantenimiento
Avoid cheap generic toners that cake and clog supply lines. Periodic maintenance of the supply ports ensures longevity.Cuándo llamar a un técnico
If the motor test fails or the code repeats after thorough cleaning, replace the pump motor assembly.Ficha técnica del equipo
- Technology: Laser Printing
- Speed: 45 ppm
- System: Toner Pump Motor
- Consumible compatible: MPC4503 Toner Series
- Drivers / firmware oficial: https://www.ricoh.com/support/mp-c4503
Steps to follow
- 1
Check toner
Ensure the toner cartridge is not locked.
- 2
Inspect pump
Check if the toner pump motor turns freely.
- 3
Test motor
Use SP 5-804 to perform a motor test.
Frequently asked questions
It's a toner supply motor failure indicating that toner is not reaching the development unit.
Yes, poor-quality toner can clog the pump and motor assembly.
Only if the motor doesn't spin after cleaning.
Use premium toner cartridges and keep the supply area clean.