sc302MP 2001L

Ricoh MP 2001L SC302 Error: Charge Failure

The Ricoh MP 2001L error SC302 points to a leakage or irregularity in the voltage applied to the primary charge roller. This fault results in repetitive print marks or a total system lock. To fix the SC302 error, a thorough cleaning of the charge roller is necessary, along with checking that all high-voltage contact points are clean and functional.

1 views

Common causes

  • 1Severe toner contamination of the charge roller.
  • 2Electrical fault in the high-voltage unit.
  • 3Excessive physical wear on the drum surface.
  • 4Oxidized or misaligned electrical contact pins.

Solutions

Diagnóstico rápido

The SC302 often appears if the charge roller is heavily coated in toner dust. If recent prints had black streaks, the root cause is contamination in the imaging unit.

Solución paso a paso

  1. Inspect Drum Unit: Remove the imaging unit and check for toner residue.
  2. Clean Roller: Gently wipe the surface of the charge roller with a clean, dry cloth.
  3. Check Contacts: Ensure the metal contact pins that supply charge aren't bent or damaged.
  4. Reset: Power cycle the device to check if the error is cleared.

Prevención y mantenimiento

Use genuine consumables to avoid dust buildup. Periodic cleaning with compressed air helps prevent toner migration onto electronic components.

Cuándo llamar a un técnico

If the SC302 recurs after deep cleaning, the high-voltage power board or the entire drum unit likely needs replacement.

Ficha técnica del equipo

  • Technology: Laser Copier
  • Speed: 20 ppm
  • Connectivity: USB
  • Capacity: 1350 sheets
  • Compatible consumables: Ricoh 1270D Toner
  • Recommended usage: Small/medium office
  • Official Drivers / firmware

Steps to follow

  1. 1

    Inspect Drum Unit

    Remove the imaging unit and check the charge roller for toner stains.

  2. 2

    Clean Roller

    Gently clean the charge roller with a dry cloth or isopropyl alcohol if required.

  3. 3

    System Reset

    Turn the power off and on to clear the charge error.

Frequently asked questions

It is a leakage error in the drum's primary charge which prevents proper image formation.

Keep the device dust-free and use genuine Ricoh 1270D toner to avoid contaminating the rollers.

Yes, if the error persists after cleaning the roller, the drum may have reached its end of life.

A technical inspection of the charging unit is advised every 20,000 prints.

Ricoh MP 2001L SC302 Error: Charge Failure | Vimazdev