sc122MP 205SPF

Ricoh MP 205SPF SC122 error: Scanner solution

The Ricoh MP 205SPF error SC122 occurs when the scanner carriage fails to reach its home position. This is often caused by mechanical resistance or an obstruction preventing smooth movement.

1 views

Common causes

  • 1Physical obstruction in the rail path.
  • 2Worn-out scanner data ribbon cable.
  • 3Faulty home position sensor.
  • 4Insufficient rail lubrication.

Solutions

Quick diagnosis

Listen for unusual clicking sounds during startup; this suggests the motor is struggling to move the scanner carriage.

Step-by-step solution

  1. Turn off the printer via the main power switch.
  2. Open the top cover and remove any foreign objects.
  3. Verify the carriage moves freely across the rail.
  4. Power on the machine to attempt a re-initialization.

Prevention and maintenance

Clean the scanner glass regularly with an anti-static cloth. Avoid placing heavy items on the top lid to maintain optical alignment.

When to call a technician

If resetting and cleaning do not resolve the error, the motor or scanner control board may require professional repair.

Equipment data sheet

  • Technology: Laser / Flatbed Scanner
  • Speed: 20 cpm
  • Connectivity: USB / Network
  • Compatible supplies: MP 201/301 Toner
  • Recommended use: Professional office
  • Drivers / official firmware

Steps to follow

  1. 1

    Reboot

    Power off the machine for 60 seconds to reset the scanner carriage.

  2. 2

    Check glass

    Ensure the scanner glass is clean and free of debris.

  3. 3

    Check carriage

    Verify that no obstacles block the sliding path of the scanner module.

Frequently asked questions

This error appears when the scanner home sensor fails to detect the unit position upon startup.

Generally, you can still print as the printing mechanism is separate from the scanner.

No, the scanner is an optical component unrelated to toner or ink levels.

Keep the scanner glass clear and avoid placing heavy objects on the lid.