ribbon-wrinkle-alertpc42t-plus-iii

Honeywell PC42t Plus III error ribbon-wrinkle-alert Guide

The Honeywell PC42t Plus III error ribbon-wrinkle-alert notifies the user that the ribbon is creasing during the printing cycle. This often results in blurry images or vertical white lines. Resolving the Honeywell PC42t Plus III error ribbon-wrinkle-alert starts with adjusting tension settings.

1 views

Common causes

  • 1Uneven ribbon tension between spools.
  • 2Low-grade ribbon film susceptible to heat deformation.
  • 3Media guides set too tightly against ribbon edges.
  • 4Dirty or sticky platen rollers causing drag.

Solutions

Quick Diagnosis

If you see uneven print density or streaks on your labels, you are likely facing a wrinkle issue. Check the ribbon path immediately.

Step-by-Step Fix

  1. Alignment: Make sure both the supply and take-up spools are correctly locked.
  2. Tensioning: Remove all slack by hand by rotating the take-up reel until the ribbon is taut.
  3. Media adjustment: Loosen the media guides slightly so they don't pinch the ribbon.
  4. Cleaning: Wipe the platen roller to remove adhesive buildup.

Prevention and Maintenance

Use only high-quality ribbons. Clean the print head every 2-3 rolls to ensure smooth friction-free operation.

When to Call a Technician

If the ribbon continues to wrinkle after re-seating and guide adjustments, the printhead spring pressure might be uneven, needing expert calibration.

Equipment Specs

  • Technology: Thermal Transfer
  • Print speed: 4 ips
  • Connectivity: USB
  • Compatible ribbon: Honeywell PC-series
  • Recommended use: Logistics and Shipping
  • Official drivers / firmware

Steps to follow

  1. 1

    Check ribbon alignment

    Ensure the ribbon roll is centered on the spindle.

  2. 2

    Remove slack

    Manually tension the ribbon to eliminate existing folds.

  3. 3

    Verify guides

    Make sure media guides are not compressing the ribbon edges.

Frequently asked questions

It detects when the thermal transfer ribbon is not feeding smoothly, resulting in creases.

It reduces print quality significantly, so you should address it to prevent ruined labels.

Use Honeywell certified wax/resin ribbons for consistent performance.

Use alcohol-based cleaning pens on the print head to keep surfaces debris-free.