ribbon-outS600XT

Zebra S600XT Ribbon Out Error: How to Fix

The Zebra S600XT error Ribbon Out occurs when the card printer cannot detect the transfer film. This prevents card production. The primary cause is often a broken ribbon or a dirty optical sensor failing to read the ribbon's markers.

1 views

Common causes

  • 1Empty ribbon cartridge.
  • 2Snapped ribbon film during operation.
  • 3Dust buildup blocking the optical sensor path.
  • 4Incorrectly installed spools preventing motor rotation.

Solutions

Quick Diagnosis

The Ribbon Out error causes a blinking red LED. Check if the ribbon is taut across the rollers.

Step-by-step Solution

  1. Open cover: Access the ribbon bay.
  2. Inspect ribbon: Check for breaks or tangles.
  3. Reset ribbon: Ensure the ribbon is tensioned correctly on the spools.
  4. Calibrate: Run the sensor calibration routine via the printer software.

Prevention and Maintenance

Clean the optical sensors with isopropyl alcohol periodically. Avoid direct contact with the ribbon's surface.

When to call a technician

If the error persists after ribbon replacement and sensor cleaning, the sensor hardware may be faulty.

Device Technical Specifications

  • Technology: Thermal sublimation
  • Resolution: 300 dpi
  • Connectivity: USB 2.0
  • Consumable: TrueColors (YMCKO) series
  • Recommended Use: High-quality ID cards
  • Official Drivers / firmware

Steps to follow

  1. 1

    Open cover

    Access the ribbon bay.

  2. 2

    Inspect ribbon

    Check for breaks or tangles.

  3. 3

    Reset ribbon

    Ensure the ribbon is tensioned correctly.

Frequently asked questions

The printer sensor fails to detect the ribbon, typically due to a break or sensor misalignment.

It is a standard maintenance error easily solved by reloading the ribbon.

Use only authentic Zebra TrueColors ribbon series.

Clean the sensors regularly with isopropyl alcohol.