Ribbon OutPC42t Plus

Honeywell PC42t Plus Ribbon Out Error Fix

The 'Ribbon Out' status on the Honeywell PC42t Plus alerts the user that the thermal transfer ribbon is empty or not feeding properly. This prevents printing errors and protects the thermal printhead. Following the correct loading procedure typically resolves the status immediately.

1 views

Common causes

  • 1Empty ribbon roll requiring replacement.
  • 2Print film snapped during operation.
  • 3Ribbon loaded with the wrong side facing the printhead.

Solutions

Check Ribbon Status

  1. Inspect the ribbon supply for depletion.
  2. Ensure the ribbon is correctly attached to the take-up spool.
  3. Check for any tangles or breaks in the film.

Proper Loading

  1. Remove used cores.
  2. Load new ribbon onto the supply hub.
  3. Thread the ribbon through the printhead module.
  4. Tape the end onto the take-up core and wind firmly.

Steps to follow

  1. 1

    Open Printer

    Release the cover latch and open the top housing.

  2. 2

    Load Ribbon

    Insert cores ensuring they align with the hub keys.

  3. 3

    Remove Slack

    Manually turn the take-up gear to eliminate ribbon slack.

Frequently asked questions

No, if you select Direct Thermal in your driver, the printer should ignore the ribbon sensor.

Excessive heat settings or poor quality ribbon film are the most common culprits.

You can only bypass it by switching to Direct Thermal mode in your printer settings if you are using heat-sensitive labels.

Honeywell PC42t Plus Ribbon Out Error Fix | Vimazdev