paper-size-errorHL-2130

Brother HL-2130 error PAPER-SIZE: Fix Guide

The Brother HL-2130 error PAPER-SIZE occurs when the printer detects a mismatch between the physical media in the tray and the software configuration. This mismatch halts printing, requiring the user to adjust settings in their OS. This laser printer is designed for small home offices.

0 views

Common causes

  • 1Misaligned guides: Guides are not pressing correctly against paper edges.
  • 2Software mismatch: Document set to A4 while tray holds Letter-sized paper.
  • 3Dirty sensors: Paper dust buildup on the internal optical readers.
  • 4Incorrect loading: Curled paper triggering the error sensor.

Solutions

Quick Diagnosis

If the LED blinks, the unit has detected that the paper size sent to the queue does not match the format detected by internal sensors.

Step-by-Step Solution

  1. Ensure paper guides are adjusted snugly against the paper edges.
  2. In Windows Printing Preferences, select the correct paper size.
  3. Cancel pending print jobs and resend the document.
  4. Re-insert the paper tray to ensure the sensor registers correctly.

Prevention and Maintenance

Do not mix media types in the tray. Regularly clean paper feed rollers to prevent misfeeds that can trick the sensors.

When to Call a Technician

If the error persists after confirming settings and cleaning sensors, the internal size-detection sensor may be faulty.

Equipment Technical Data

  • Technology: Monochrome Laser
  • Throughput: 20 ppm
  • Connectivity: USB 2.0
  • Feeding Capacity: 250-sheet tray
  • Compatible Consumables: TN-2010 Toner / DR-2010 Drum
  • Recommended Use: Home office documents
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Adjust guides

    Slide the paper guides to the exact edge of the sheets in the tray.

  2. 2

    Configure driver

    Set the paper size to 'A4' or 'Letter' in print preferences.

  3. 3

    Clean sensors

    Use a dry cloth to gently clean internal size sensors.

Frequently asked questions

The printer detects a mismatch between physical media and software configuration.

It is not critical but will stop all jobs until media settings are matched.

It utilizes the TN-2010 toner cartridge and DR-2010 drum.

Keep the tray dry and always align guides properly.

Brother HL-2130 error PAPER-SIZE: Fix Guide | Vimazdev