Paper Out Sensor ErrorFTP-64K

Fix Fujitsu FTP-64K Paper Out Sensor Error - Easy Guide

The 'Paper Out' error on the FTP-64K indicates the optical sensor cannot detect the thermal paper. This is usually caused by paper dust covering the sensor lens. Simple cleaning and proper loading usually resolve this behavior.

1 views

Common causes

  • 1Accumulated paper dust blocking the sensor.
  • 2Incorrect paper tension/alignment.
  • 3Sensor lever stuck due to residue.

Solutions

Cleaning the sensor

  1. Open the printer cover.
  2. Locate the optical sensor path.
  3. Clean the area with a dry cotton swab.

Load Verification

  1. Remove the paper roll.
  2. Ensure the paper is routed flat across the sensor.

Steps to follow

  1. 1

    Open

    Open the printer feed cover.

  2. 2

    Clean

    Clear any debris from the sensor channel.

  3. 3

    Load

    Insert new roll and close the cover firmly.

Frequently asked questions

It is likely a dirty sensor lens, very common in high-volume environments.

Not recommended, as moisture from breath can damage sensitive electronics.

Yes, but it requires technical disassembly; contact support first.

Fix Fujitsu FTP-64K Paper Out Sensor Error - Easy Guide | Vimazdev