paper-outDPK900
Fujitsu DPK900 Error Paper Out: Solution
The Fujitsu DPK900 error paper out is a standard alert indicating the sensor does not detect loaded media. This is very common on this impact printer if the paper is slightly misaligned or the side guides are set too wide. Resolving the paper out error on your DPK900 typically just requires repositioning the paper. This impact device is an ideal tool for continuous-form printing in various logistics and accounting applications.
0 views
Common causes
- 1Paper outside sensor position
- 2Guides too wide
- 3Debris on sensor lens
- 4Defective presence sensor
Solutions
Diagnóstico rápido
If the printer says 'Paper Out' even when paper is present, it means the paper is outside the optical sensor's field of view. Check if the paper covers the central sensor.Solución paso a paso
- Remove the paper and re-insert it carefully.
- Align the edge of the paper exactly under the start mark.
- Close the top cover to activate the presence sensor.
- Press 'Load/Eject' to initiate the traction.
Prevención y mantenimiento
Clean the paper sensor with a soft brush periodically to remove paper dust. Avoid using paper with ragged or torn edges.Cuándo llamar a un técnico
If the sensor continues to indicate 'Paper Out' after repositioning, the optical sensor may be permanently dirty or the wiring could be faulty.Ficha técnica del equipo
- Technology: Dot Matrix impact
- Print Speed: Up to 450 cps
- Connectivity: Parallel, Serial
- Compatible Supply: DPK900 series ribbon
- Drivers / Official Firmware: https://www.fujitsu.com/global/products/computing/peripheral/printers/dpk900/
Steps to follow
- 1
Adjust
Position paper correctly under the sensor.
- 2
Align
Ensure side guides are properly fitted.
- 3
Reset
Press the load/eject paper button.
Frequently asked questions
The sensor is not detecting the physical presence of paper in the feed path.
Slide guides inward so the sensor detects the sheet.
Continuous paper up to 6 copies.
Yes, if old paper debris blocks it.