paper-near-end-warningTM-T88VI

Paper Near End Warning on Epson TM-T88VI Printer

The Paper Near End status warning acts as a precursor, signaling that your thermal paper roll core diameter is dropping below a defined threshold before printing errors occur.

1 views

Common causes

  • 1The physical media diameter has decreased to the minimum monitoring radius.
  • 2The mechanical micro-switch is stuck or coated in dust.
  • 3Using non-standard roll dimensions with unusually thick cores.

Solutions

Adjusting the Near End Physical Sensor

If alerts are triggered prematurely despite possessing ample media, calibrate the physical lever:

  1. Locate the Internal Mechanical Sensor: This is an adjustable sliding metal contact located on the bottom/side corner inside the roll basin.
  2. Clear Paper Dust buildup: Wipe down the plastic lever arm with dry microfiber cloths to lift wax residues.
  3. Deactivate Warnings Software-Side: If using coreless paper rolls, use the printer properties tool to turn off the reporting flag to prevent POS soft-locks.

Steps to follow

  1. 1

    Find the Slider Switch

    Remove the paper roll entirely and identify the small screw-locked adjustable slider.

  2. 2

    Optimize Detection Point

    Shift the slider position up or down to align with the core width of your current media brand.

Frequently asked questions

Generally, the printer keeps working. However, specific billing apps may pause queues if they interpret the warning state as a critical halt.

Paper Near End Warning on Epson TM-T88VI Printer | Vimazdev