paper-jamMFC-L6800DW

Brother MFC-L6800DW Paper Jam Error Fix

The Brother MFC-L6800DW Paper Jam error occurs when the internal path sensors are blocked. This is often caused by improperly loaded paper or worn feed mechanisms in the printer.

1 views

Common causes

  • 1Misloaded Paper: Guides loose.
  • 2Humidity: Moist paper sticks.
  • 3Worn Rollers: Slipping feed.
  • 4Debris: Internal scraps.

Solutions

Quick Diagnosis

If the printer displays a jam error, follow the instructions to clear the specific area mentioned on the panel.

Step-by-Step Solution

  1. Turn off and cool the fuser.
  2. Remove toner/drum unit.
  3. Open rear cover.
  4. Extract paper gently.
  5. Reset and restart.

Prevention and Maintenance

Use dry paper and keep paper guides snug against the stack.

When to Call a Technician

If the jam recurs without paper, the path sensor needs professional repair.

Equipment Data

  • Technology: Monochrome Laser
  • Consumable: TN-820 Toner
  • Connectivity: Wi-Fi/Ethernet
  • Use Case: High Volume Office
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Open rear cover

    Open the back cover fully.

  2. 2

    Clear paper

    Gently pull out any stuck paper near the fuser.

  3. 3

    Check trays

    Clear all paper paths from inlet/outlet.

Frequently asked questions

Turn off, open rear access, and remove paper manually. Be careful around the fuser.

Always turn off the printer. Let the fuser unit cool down before reaching inside.

Leaky toner can cause roller slipping and frequent jams.

Fan the paper stack before loading and don't overfill the paper tray.