Paper JamBrother HL-L6200DW

Fixing Paper Jam on Brother HL-L6200DW

A 'Paper Jam' error occurs when media is misfed or trays are overfilled. This guide shows you how to safely remove paper from your Brother HL-L6200DW to prevent damage to sensitive internal components.

1 views

Common causes

  • 1Using paper outside the weight specifications.
  • 2High humidity causing paper to clump.
  • 3Dust accumulation on pickup rollers.

Solutions

Tray Clearing

  1. Fully remove the paper tray.
  2. Remove any crumpled paper.
  3. Check guides are locked against the paper stack.

Rear Fuser Area

  1. Open the rear output tray.
  2. Gently pull out stuck sheets from the fuser assembly.
  3. Ensure no torn scraps remain.

Steps to follow

  1. 1

    Power Down

    Switch off the printer and disconnect from power.

  2. 2

    Remove Paper

    Extract the stuck media gently to avoid tearing.

  3. 3

    Reboot

    Close all panels and power on to resume.

Frequently asked questions

Only if necessary, but be extremely careful not to scratch the rollers.

If you notice frequent misfeeds, clean rollers with a lint-free cloth.

Check your manual; usually up to 120gsm for the tray.

Fixing Paper Jam on Brother HL-L6200DW | Vimazdev