paper-jam-01B-EX6T1

Toshiba B-EX6T1 Paper Jam Error: Solution

Toshiba B-EX6T1 error paper jam indicates that the printer's label sensor has detected a lack of movement, usually caused by a physical obstruction or material stall. Why does my Toshiba B-EX6T1 show paper jam error? It is frequently triggered by stray adhesive or misaligned labels. Clearing the path usually solves this.

1 views

Common causes

  • 1Adhesive labels detaching and sticking to the roller.
  • 2Dirty drive rollers reducing traction.
  • 3Label guides too tight or too loose.
  • 4Paper sensor blocked by paper dust.

Solutions

Diagnóstico rápido

The error is visible when labels fail to advance as expected. Visually confirm the material path for any crumpled paper or misplaced adhesive labels.

Solución paso a paso

  1. Lift the print head mechanism to clear material.
  2. Inspect the drive rollers for stuck adhesive residue.
  3. Clean the rollers thoroughly with isopropyl alcohol.
  4. Re-calibrate the paper sensor once the path is clear.

Prevención y mantenimiento

Avoid low-quality labels that leave excessive residue. Clean drive rollers every week. Check that the label guide width matches the loaded media.

Cuándo llamar a un técnico

If the error occurs without any physical jam, the feed motor or movement sensor might require professional inspection.

Ficha técnica del equipo

  • Technology: Industrial Label Printer
  • Drive System: High-friction pressure rollers
  • Connectivity: USB, LAN, Serial
  • Feed Capacity: 160mm width
  • Compatible Consumables: Thermal/Transfer Labels
  • Recommended Use: High-volume Industrial
  • Drivers / official firmware

Steps to follow

  1. 1

    Open

    Lift the print head to release the material.

  2. 2

    Remove

    Extract jammed material carefully to avoid sensor damage.

  3. 3

    Clean

    Clean the rollers with isopropyl alcohol.

Frequently asked questions

The label sensor is not detecting forward motion, signaling a jam or obstruction.

It is quite common in dusty industrial areas where adhesive residue affects drive performance.

Avoid low-quality labels with bleeding adhesive as they quickly foul the drive rollers.

Regular cleaning of rollers and clear paper paths ensure steady label feed.