paper-jam-001P2201D

Pantum P2201D error Paper Jam 001: Easy Fix

The Pantum P2201D error Paper Jam 001 means paper is caught in the internal path. This common issue is usually resolved by removing the toner cartridge and clearing the obstruction manually.

1 views

Common causes

  • 1Misaligned stack: Paper fed at an angle.
  • 2Debris: Small paper shreds stuck in the rollers.
  • 3Roller wear: Feed rollers losing grip after high usage.

Solutions

Diagnóstico rápido

The error alerts that the machine cannot complete the paper cycle. Check both the input tray and the internal exit area.

Solución paso a paso

  1. Disconnect power.
  2. Open the unit and remove the toner cartridge.
  3. Carefully extract any paper pieces found.
  4. Close the unit and resume.

Prevención y mantenimiento

Clean rollers with water and a soft cloth every few months to keep the grip reliable.

Cuándo llamar a un técnico

If you see no paper but the error persists, the feed sensor may be broken.

Ficha técnica del equipo

  • Technology: Laser Monocromo
  • Speed: 20 ppm
  • Connectivity: USB 2.0
  • Capacity: 150 sheets
  • Compatible Consumable: PC-210 toner
  • Recommended Use: Home / Small office
  • Drivers / firmware official

Steps to follow

  1. 1

    Power down

    Switch off the printer to protect internal sensors.

  2. 2

    Remove toner

    Pull out the toner cartridge to access the paper feed path.

  3. 3

    Clear jam

    Gently pull the paper out in the direction of the paper feed.

Frequently asked questions

It signals that paper is physically obstructing the internal feed path sensors.

No, always pull gently to avoid tearing paper inside or damaging mechanical parts.

This model uses PC-210 series toner cartridges.

Fan your paper stack before loading and ensure it is below the capacity limit.