paper-jam-001PagePro 1590MF

Konica Minolta PagePro 1590MF error paper jam 001 Fix

The Konica Minolta PagePro 1590MF error paper jam 001 indicates a physical obstruction along the media path. This alert triggers when internal sensors stop detecting the paper movement, forcing an immediate stop. Why does my printer show error paper jam 001? It is commonly caused by improper paper tray loading or worn-out feed rollers on this compact laser unit.

0 views

Common causes

  • 1Improperly aligned paper in the tray, causing a skewed feed that triggers the error sensors.
  • 2Worn feed rollers that fail to pull the paper evenly through the internal path.
  • 3Foreign objects like staple scraps or labels obstructing the paper path.
  • 4Toner dust buildup on output sensors, leading to persistent false error readings.

Solutions

Diagnóstico rápido

If you observe that paper halts midway during printing, verify if error paper jam 001 is flashing on the display panel. It is crucial to check for tiny paper fragments near the fuser unit, as these residues frequently cause false obstruction alerts.

Solución paso a paso

  1. Power off: Disconnect the printer from the power source to ensure safety during the process.
  2. Open front cover: Gently open the main front door to access the toner cartridge area.
  3. Clear paper: Remove the jammed paper by pulling it gently in the direction of the feed path.
  4. Check sensors: Ensure no small scraps remain inside before closing the door and restarting.

Prevención y mantenimiento

Use standard quality paper and do not overfill the input tray. Regularly clean the rubber feed rollers with a lint-free cloth. Using original toner cartridges helps maintain the internal environment clean, significantly reducing the likelihood of mechanical jams.

Cuándo llamar a un técnico

If the error message persists after clearing all paper, it is likely that an internal paper sensor has failed and requires professional repair.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed/Performance: 20 ppm
  • Connectivity: USB 2.0
  • Input Capacity: 250 sheets
  • Compatible consumables: 1500 Series Toner (A6VM001)
  • Recommended use: Small office / Home office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Disconnect the printer from the power source to ensure safety during the process.

  2. 2

    Open front cover

    Gently open the main front door to access the toner cartridge area.

  3. 3

    Clear paper

    Remove the jammed paper by pulling it gently in the direction of the feed path.

  4. 4

    Check sensors

    Ensure no small scraps remain inside before closing the door and restarting.

Frequently asked questions

This error occurs when the internal sensors detect an obstruction in the paper path, usually caused by misaligned paper or dirty feed rollers.

It is not an emergency, but it requires careful attention to avoid damaging the delicate sensor mechanisms.

It uses the 1500 series toner cartridges, which are available in both standard and high-yield capacities.

Regular cleaning every 5,000 pages or if frequent misfeeds occur is recommended to keep the paper path clear.

Konica Minolta PagePro 1590MF error paper jam 001 Fix | Vimazdev