p10PIXMA TS3450

Canon PIXMA TS3450 error P10: Troubleshooting Guide

The Canon PIXMA TS3450 error P10 is a critical warning related to the print carriage movement. It typically occurs when the printer detects a logic error or electrical short in the cartridges, preventing the motor from operating smoothly. Simple cleaning steps are usually sufficient to clear this error.

1 views

Common causes

  • 1Shorted electrical chip on the ink cartridge.
  • 2Debris blocking the carriage rail.
  • 3Faulty encoder strip.
  • 4Motor overload due to lack of maintenance.

Solutions

Diagnóstico rápido

The P10 error is signaled by the status lights blinking in a specific pattern. If the carriage assembly feels blocked or doesn't move when the power is toggled, it points towards a cartridge chip issue.

Solución paso a paso

  1. Hard Power Off: Unplug the power directly to trigger a complete reset.
  2. Remove Cartridges: Take out both ink units.
  3. Clean Pins: Gently wipe the gold contacts on the cartridges.
  4. Test: Reinsert the cartridges and turn the printer on.

Prevención y mantenimiento

Avoid cheap generic cartridges, as their chips are often incompatible or faulty, leading to electrical shorts. Regular dusting inside the case keeps sensors accurate.

Cuándo llamar a un técnico

If the P10 error persists after testing with known-good cartridges, the internal logic board may have suffered an electrical fault.

Ficha técnica del equipo

  • Technology: Inkjet Multifunction
  • Speed: 7.7 ipm monochrome
  • Connectivity: Wi-Fi, Canon PRINT app
  • Compatible Consumables: PG-545 / CL-546 series
  • Use case: Home printing
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Hard Power Off

    Unplug the power cord while the unit is still on.

  2. 2

    Cartridge check

    Remove and reseat the ink cartridges.

  3. 3

    Clean contacts

    Clean the electrical pins on the cartridges with isopropyl alcohol.

Frequently asked questions

Error P10 relates to a carriage motor overload, often caused by a communication failure with the ink cartridges.

Yes, it is often resolved by resetting the printer or cleaning the cartridge contacts.

It uses PG-545 and CL-546 series cartridges. A faulty chip can trigger P10.

Quarterly cleanings prevent dust accumulation that could cause carriage stalls.

Canon PIXMA TS3450 error P10: Troubleshooting Guide | Vimazdev