p08PIXMA E3370

Canon PIXMA E3370 error P08: Fix Guide

The Canon PIXMA E3370 error P08 triggers when the printer software determines the waste ink counter has hit its maximum capacity. This error doesn't imply the printer is broken, but rather that the internal absorption system is nearing its limit. To fix the P08 error on your PIXMA E3370, you must enter service mode to reset the pad counter value.

1 views

Common causes

  • 1Waste ink absorber pad limit reached.
  • 2Excessive use of automated head cleaning cycles.
  • 3Software counter sensor mismatch.
  • 4Ink buildup from frequent purging cycles.

Solutions

Diagnóstico rápido

The P08 error displays as a flashing pattern on the panel. If you have been doing many print head cleanings, the counter has surely hit the limit.

Solución paso a paso

  1. Enter Service Mode: With the printer off, hold the 'Stop' button and press 'Power'.
  2. Reset Operation: While holding Power, release Stop, press Stop 5 times, then release Power.
  3. Verification: The device enters service mode. Use service software to reset the counter to zero.
  4. Reboot: Turn the printer off and on to clear the error.

Prevención y mantenimiento

Only run head cleanings when print quality actually drops. Minimize unnecessary power cycles, as each one uses a bit of ink in automated purging.

Cuándo llamar a un técnico

If resetting the counter doesn't work or if you see ink stains on the desk under the printer, the physical absorber pad must be replaced by technical staff.

Ficha técnica del equipo

  • Technology: Inkjet Printer
  • Speed: Up to 7.7 ipm
  • Connectivity: Wi-Fi, USB
  • Compatible consumables: Canon PG-47, CL-57s
  • Recommended usage: Home and students
  • Official Drivers / firmware

Steps to follow

  1. 1

    Enter Service Mode

    With the printer off, hold down the Stop button and power the device on.

  2. 2

    Reset Operation

    Press the Stop button 5 times to reset the pad counter.

  3. 3

    Reboot

    Turn the printer off and on again normally to clear the P08 error.

Frequently asked questions

It is a notification that the waste ink pad has reached its software-calculated saturation limit.

It's recommended. Resetting the software clears the error, but the ink could eventually overflow.

It uses Canon PG-47 (black) and CL-57s (color) cartridges.

Minimize unnecessary head cleanings, as each cycle rapidly fills the residue counter.

Canon PIXMA E3370 error P08: Fix Guide | Vimazdev