p07pixma ts3300

Canon PIXMA TS3300 Error P07: How to Fix and Reset

The Canon PIXMA TS3300 error P07 is a maintenance alert notifying that the internal ink absorber pad counter is full. This usually occurs after intensive print cycles or frequent deep cleanings. Addressing this error is essential to restore printer functionality. The TS3300 is a reliable home inkjet printer, and understanding this system message is key to long-term ownership.

1 views

Common causes

  • 1Excessive use of automatic print head cleaning.
  • 2Counter reaching the manufacturer factory limit.
  • 3Sensor error caused by internal waste ink buildup.

Solutions

Quick Diagnosis

If your printer display indicates P07 and the alarm light flashes seven times, the internal counter has reached capacity. This prevents potential ink leaks within the machine. Check if your print jobs are stuck in the queue and verify the light signal pattern.

Step-by-Step Solution

  1. Service Mode: Power off the unit, keep it connected to the power outlet.
  2. Command Entry: Press and hold 'Stop', then press and hold 'Power'.
  3. Reset Process: Release 'Stop', press it 5 times, then release 'Power'.
  4. Initialization: Allow the printer to cycle; the LED will stop blinking once the reset is successful.

Maintenance and Prevention

Minimize the use of 'Deep Cleaning' routines to prevent rapid filling of the ink absorber. Ensure the printer environment is clean to keep sensors free of debris. Using genuine ink cartridges helps maintain optimal printing pressure, reducing the volume of ink sent to the waste pads.

When to Call a Technician

If the P07 error returns immediately after a reset, or if there are visible physical signs of ink leaking from the bottom of the device, you should contact a professional. The absorber pads may physically need replacement.

Technical Specifications

  • Technology: Thermal Inkjet.
  • Speed: Up to 7.7 ppm Black / 4 ppm Color.
  • Connectivity: Wi-Fi and USB.
  • Input Capacity: 60-sheet rear tray.
  • Compatible Consumables: PG-245 / CL-246 Series.
  • Recommended Use: Home office.
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Enter Service Mode

    Turn off the printer and hold the Stop button while turning it back on.

  2. 2

    Execute Reset

    Press the Stop button 5 times, then release the power button.

  3. 3

    Reboot

    Power off and on again to clear the error state.

Frequently asked questions

The P07 error indicates that the internal ink waste counter has reached its manufacturer-set limit.

It is a standard maintenance alert. Your printer will stop working until the counter is reset to prevent ink overflow.

This model uses the PG-245 and CL-246 series cartridges for high-quality printing.

Only run head cleaning cycles when you notice print quality degradation to minimize ink waste.