P07PIXMA TS202

Error P07 Canon PIXMA TS202: Waste Ink Counter Fix

The P07 error indicates that the waste ink absorber in your Canon PIXMA TS202 has reached its capacity. This is a safety mechanism to prevent internal leakage. The solution requires resetting the internal counter via service software and potentially physically replacing the absorber pads.

0 views

Common causes

  • 1Excessive use of automated head cleaning cycles.
  • 2Factory-set limit reached for ink waste absorption.
  • 3Long-term use (multi-year) without maintenance.
  • 4Internal EEPROM logging fault.

Solutions

Diagnóstico rápido

The P07 code is signaled by 7 steady orange flashes on the alarm light. It means the printer's internal firmware has reached its pre-set limit for ink maintenance purging cycles.

Solución paso a paso

  1. Enter Service Mode using the specific physical button sequence (Stop + Power).
  2. Connect the printer via USB to a computer.
  3. Run the Canon Service Tool application to communicate with the EEPROM.
  4. Reset the ink counter using the designated option within the tool.
  5. Restart the printer to refresh its state.

Prevención y mantenimiento

  • Limit the use of 'Deep Cleaning' cycles, as they consume massive amounts of ink and fill the pads.
  • Keep the printer level at all times.
  • Use genuine ink to prevent clogging that leads to frequent cleaning cycles.

Cuándo llamar a un técnico

Software resetting is only a temporary fix. If you see signs of ink saturation inside the chassis, professional cleaning or pad replacement is mandatory to prevent electrical shorts.

Ficha técnica del equipo

  • Technology: Inkjet with internal ink waste system
  • Speed/Performance: 7.7 ipm black
  • Connectivity: USB 2.0
  • Feed Capacity: 60 sheets
  • Compatible consumables: Canon PG-245 / CL-246
  • Recommended use: Home use
  • Official drivers / firmware

Steps to follow

  1. 1

    Service mode activation

    Press the Power and Stop buttons in the correct sequence.

  2. 2

    USB connectivity

    Connect the printer directly to a computer via USB cable.

  3. 3

    Counter reset

    Use service software to clear the ink absorber counter value.

  4. 4

    Power cycle

    Power off and on to finalize the reset procedure.

Frequently asked questions

The P07 error means the waste ink counter is full. You need to perform a software reset to continue using the device.

No, it is not recommended. The printer stops to prevent ink from spilling inside the machine.

It uses the PG-245 (black) and CL-246 (color) series cartridges.

Avoid running too many 'Deep Cleaning' cycles and rely on genuine ink to keep the system running efficiently.