p07PIXMA MG3620

Error P07 Canon PIXMA MG3620: How to Reset

The Canon PIXMA MG3620 error P07 signifies that the ink absorber pad has reached its limit. This state prevents printing to avoid internal ink leaks. To resolve this, you must enter service mode and reset the internal counter. This model is a home-focused inkjet printer, and this limitation is a standard safety feature.

1 views

Common causes

  • 1Excessive automatic cleaning cycles.
  • 2Normal saturation of waste ink pads.
  • 3Counter reaching firmware threshold.
  • 4Malfunctioning waste ink sensor.

Solutions

Quick Diagnosis

Error P07 typically shows as 7 blinks of the alarm light. Ensure it is not a paper jam.

Step-by-Step Solution

  1. Turn off the printer.
  2. Hold Stop while pressing Power.
  3. Release Stop, keep Power held, and press Stop 5 times.
  4. Release Power and wait for the light to stabilize.

Maintenance and Prevention

Reduce frequent head cleanings. Using high-quality original ink keeps the waste pads cleaner.

When to call a technician

If you see physical ink leaks, do not continue; have the pads replaced professionally.

Technical Specifications

  • Technology: Thermal Inkjet
  • Speed: Up to 9.9 ipm
  • Connectivity: Wi-Fi, USB 2.0
  • Input: 100 sheets
  • Consumables: Canon PG-240 / CL-241 series
  • Usage: Home
  • Official Drivers

Steps to follow

  1. 1

    Power off

    Turn off the printer completely.

  2. 2

    Service mode

    Hold Stop, press Power, then press Stop 5 times.

  3. 3

    Reset counter

    Use a Canon service tool to reset the counter.

Frequently asked questions

It means the ink absorber counter has reached its maximum estimated capacity.

It is a safety limit to prevent ink spills, not a hardware breakdown.

It uses Canon PG-240 and CL-241 cartridges.

Technicians suggest an inspection every 2-3 years for home use.

Error P07 Canon PIXMA MG3620: How to Reset | Vimazdev