p07PIXMA G3020

Canon PIXMA G3020 Error P07: How to Reset Ink Counter

The canon pixma g3020 error p07 signals that the ink absorber counter is full. Users often search for why is my canon pixma g3020 showing error p07 when the printer suddenly stops responding to print commands. Understanding this status is key to maintaining your device effectively.

1 views

Common causes

  • 1Excessive use of automatic printhead cleaning cycles.
  • 2Pre-programmed page count limit reached.
  • 3Normal wear and tear of waste ink collection system.
  • 4Accumulated ink residue exceeding safety thresholds.

Solutions

Quick Diagnosis

If you see the orange lamp flashing repeatedly, your printer has flagged that the internal ink waste collection pad is reaching capacity.

Step-by-Step Solution

  1. Power off the machine completely.
  2. Enter service mode by holding Stop and Power buttons simultaneously.
  3. Release Stop while holding Power, then press Stop 5 times.
  4. Release the Power button to engage reset mode.

Prevention and Maintenance

Avoid running repeated deep-cleaning cycles unless the output quality is poor. Keep the printer in a clean, dust-free environment to prevent sensor issues. We recommend using original ink supplies to minimize ink waste.

When to Call a Technician

If the error returns shortly after resetting or if physical ink leakage is detected, the internal absorber pads likely need physical replacement.

Technical Specifications

  • Technology: Refillable ink tank printer.
  • Performance: Up to 11 ipm (black).
  • Connectivity: Wi-Fi, High-speed USB.
  • Input capacity: 100-sheet rear tray.
  • Compatible Consumables: GI-11 ink bottle series.
  • Recommended Use: Home or small office.
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Enter Service Mode

    Turn off the printer, press and hold the Stop button, then hold Power.

  2. 2

    Reset the Counter

    Press the Stop button 5 times while holding Power, then release both.

Frequently asked questions

This error occurs because the internal ink counter has reached its maximum limit, requiring a service reset.

It is a safety feature to prevent ink overflow. Resetting it temporarily clears the error status.

The printer uses the GI-11 ink bottle series. Using original ink ensures printhead longevity.

Limit unnecessary head cleanings to avoid prematurely filling the ink absorber pad.

Canon PIXMA G3020 Error P07: How to Reset Ink Counter | Vimazdev