p07pixma-g2020

Canon PIXMA G2020 Error P07: Ink Absorber Full Fix

The canon pixma g2020 error p07 signals that the ink waste counter has hit its manufacturer-defined limit. This causes a hard lock on the printer to avoid ink spills. Resolving this typically requires using specialized service software to reset the counter on the main board.

0 views

Common causes

  • 1Logical counter reached safety limit.
  • 2Overuse of print head cleaning cycles.
  • 3Full physical waste ink absorber pads.
  • 4Firmware logic reporting system saturation.

Solutions

Diagnóstico rápido

The error appears as 7 flashes on the orange light. What does p07 error mean on canon g2020? It means the internal sponge has reached its ink absorption capacity.

Solución paso a paso

  1. Boot the printer into Service Mode.
  2. Connect the printer to a PC via USB cable.
  3. Run a service tool compatible with the G-series hardware.
  4. Reset the 'Ink Counter' to zero.
  5. Restart the printer to apply changes.

Prevención y mantenimiento

Avoid performing too many nozzle cleaning cycles. Inspect the rear ink waste tray periodically for any signs of saturation or leaks.

Cuándo llamar a un técnico

If the error code recurs shortly after a reset, the internal physical pads may be completely saturated and require an expert technician to replace them.

Ficha técnica del equipo

  • Technology: Integrated Ink Tank.
  • Speed: Up to 9.1 ipm.
  • Consumibles: GI-11 ink bottles.
  • Usage: High-volume home/office.
  • Official drivers

Steps to follow

  1. 1

    Service Mode

    Enter service mode using the power/stop combo.

  2. 2

    USB Connection

    Link the printer to a Windows computer.

  3. 3

    Reset Utility

    Use the tool to reset the waste counter.

  4. 4

    Reboot

    Power cycle the device.

Frequently asked questions

The printer's waste ink counter has reached its limit and requires a service reset.

It will prevent printing until the internal memory counter is cleared.

The G2020 series requires original GI-11 ink bottles.

It is highly recommended to replace the pads to prevent ink leaking from the unit.