oxc19a0013pagewide pro 452dw

HP PageWide Pro 452dw error 0xc19a0013: Fix System Failure

The HP PageWide Pro 452dw error 0xc19a0013 is an ink system fault that prevents the device from completing the print cycle. This error often results from communication issues between the printhead and the ink cartridges. Proper reseating of consumables is the first line of defense.

1 views

Common causes

  • 1Internal ink pump malfunction.
  • 2Cartridge chip communication failure.
  • 3Dried ink within the printhead.
  • 4Incompatible ink formula.

Solutions

Quick Diagnosis

The error triggers when the ink supply system encounters a pressure or identification conflict, forcing the printer into an error state to prevent hardware damage.

Step-by-Step Solution

  1. Perform a hard reset by unplugging the printer while it is turned on.
  2. Open the access door and remove all cartridges.
  3. Inspect for any obstructions or ink leaks.
  4. Clean the carriage pins gently.
  5. Reinsert cartridges to initiate a fresh system check.

Prevention and Maintenance

Use official firmware updates to ensure compatibility. Avoid generic ink which may cause pressure imbalances in the PageWide array.

When to Call a Technician

If the error code persists after a hard reset and cartridge reseating, the pump or internal printhead control board may be faulty.

Equipment Technical Data

  • Technology: HP PageWide
  • Print Speed: 55 ppm
  • Interface: Ethernet, USB, Wi-Fi
  • Consumable: HP 972 ink
  • Recommended Use: High-volume offices
  • Official Drivers

Frequently asked questions

A hard reset and reseating the cartridges is the most effective initial fix.

Only if the hardware fails to respond after all software resets.

Original cartridges provide the correct ink pressure required for PageWide technology.

Keep it powered on or in sleep mode so it can perform automatic maintenance cycles.