no-trayhl-l2460dn

Brother HL-L2460DN error no tray: Fix

The Brother HL-L2460DN error no tray indicates that the input tray detection sensor is not receiving confirmation that the tray is properly inserted. This problem prevents the printer from starting any print job. Usually, re-seating the paper tray resolves the issue effectively.

0 views

Common causes

  • 1Poor seating: The base fails to complete the sensor circuit.
  • 2Obstruction: Paper scraps block the presence sensor.
  • 3Broken sensor: Micro-switch damaged due to rough handling.
  • 4Physical wear: Tray guide has lost tension.

Solutions

Diagnóstico rápido

The LCD screen displays this if the tray is slightly open or if paper debris obstructs the presence sensor in the tray cavity.

Solución paso a paso

  1. Extraction: Fully pull the paper tray out of the printer.
  2. Inspection: Check the bottom of the tray cavity for paper scraps or obstructions.
  3. Verification: Insert the tray firmly until you hear a solid click.

Prevención y mantenimiento

Do not force the tray closed. Clean the feed rollers every 6 months using a cloth dampened with isopropyl alcohol.

Cuándo llamar a un técnico

If the error persists after re-seating, the mechanical presence switch might be broken or internally disconnected.

Ficha técnica del equipo