no-paper-fedMFC-J6555DW

Brother MFC-J6555DW no paper fed error: Fix it now

The Brother MFC-J6555DW no paper fed error indicates a failure to pull sheets from the main tray. This alert triggers when the feed rollers lose traction or sensors are obscured by debris, a common scenario in high-volume settings. Most users can resolve this error by performing a simple manual cleaning of the feed mechanism.

1 views

Common causes

  • 1Dirty rollers due to paper dust accumulation.
  • 2Misaligned paper guides causing feeding skew.
  • 3Sensor blockage by debris.
  • 4Use of incompatible paper weight.

Solutions

Diagnóstico rápido

The device shows the paper feed error even when the tray is full. Debris or paper dust likely triggered the no paper fed error due to poor traction.

Solución paso a paso

  1. Remove tray: Pull out the paper tray completely from the bottom.
  2. Clean rollers: Wipe the feed rollers using a lint-free cloth.
  3. Check guides: Ensure paper guides are aligned to the correct paper size.
  4. Power cycle: Close the tray and unplug the device for 30 seconds.

Prevención y mantenimiento

Use standard paper weights to avoid debris buildup. Regular compressed air cleaning helps maintain roller grip. We recommend using original Brother ink for optimal printer performance.

Cuándo llamar a un técnico

If the error persists after cleaning and rebooting, the mechanical feed motor may be faulty and requires professional servicing.

Ficha técnica del equipo

  • Technology: Inkjet A3
  • Speed: Up to 28 ppm
  • Connectivity: Wi-Fi, Ethernet, USB
  • Capacity: 250-sheet tray
  • Compatible consumable: LC406 / LC406XL series
  • Recommended use: Medium office
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove tray

    Pull out the paper tray completely from the bottom.

  2. 2

    Clean rollers

    Wipe the feed rollers using a lint-free cloth.

  3. 3

    Check guides

    Ensure paper guides are aligned to the correct paper size.

  4. 4

    Power cycle

    Close the tray and unplug the device for 30 seconds.

Frequently asked questions

This error occurs when the sensors fail to detect paper or rollers are dirty.

No, it is usually a minor jam or maintenance issue.

It uses the LC406 or LC406XL ink series.

Perform a preventive cleaning every 6 months.