no-paperMFC-L2690DW
Brother MFC-L2690DW No Paper Error: Quick Fix
The Brother MFC-L2690DW No Paper error is a frequent notification signaling the printer cannot detect paper in the input tray. This typically happens when paper guides are incorrectly set or the tray is not seated properly. Follow this guide to resolve the issue and continue printing efficiently.
1 views
Common causes
- 1Misaligned paper guides.
- 2Tray not fully inserted.
- 3Dust accumulation on rollers.
- 4Moisture affecting paper sheet separation.
Solutions
Quick Diagnosis
The No Paper error on the MFC-L2690DW display usually confirms the printer cannot register the presence of media. Check for misaligned paper stacks or obstructions in the tray path.Step-by-Step Solution
- Pull the paper tray completely out.
- Ensure the side guides are snug against the paper edges.
- Confirm the stack does not exceed the maximum fill mark.
- Slide the tray back until it clicks securely.
Maintenance and Prevention
Avoid using damp paper as it tends to stick together. Keep the tray area clear of dust and label debris. Using original toner helps maintain the health of internal components.When to call a technician
If the error persists after checking the sensor path, the paper presence sensor may be physically faulty and require service.Technical Specs
- Technology: Laser Monochrome
- Speed: Up to 36 ppm
- Connectivity: USB, Wi-Fi, Ethernet
- Input capacity: 250 sheets
- Compatible consumable: TN-730 / TN-760 toner
- Recommended usage: Small office
- Official drivers / firmware
Steps to follow
- 1
Check tray
Remove the paper tray fully.
- 2
Align guides
Adjust side guides to match paper width.
- 3
Reinsert tray
Push the tray until it locks.
Frequently asked questions
The sensor fails to detect paper usually due to alignment issues.
No, it is a common user error.
Standard letter or A4; uses TN-730/760 toner.
Clean once a month for high volume.