No PaperMFC-J1205W

Fix Brother MFC-J1205W 'No Paper' Error: Easy Guide

The 'No Paper' error on the Brother MFC-J1205W indicates the printer sensor fails to detect paper in the tray. This is usually caused by misaligned paper guides or dust buildup on the feed rollers. Most users can resolve this by clearing the paper path and cleaning the internal intake rollers.

1 views

Common causes

  • 1Misaligned guides: Prevent the rollers from gripping the paper edge.
  • 2Dirty rollers: Dust and ink mist reduce traction.
  • 3Non-standard paper: Extremely thick or textured media blocks the sensor.
  • 4Internal debris: Paper scraps caught in the print head path.

Solutions

Diagnóstico rápido

Confirm this error when the LED flashes orange and the Brother app reports a 'No Paper' status. Check for any small scraps of paper or labels stuck inside the intake area that might trigger the sensor falsely.

Solución paso a paso

  1. Remove all paper from the tray and inspect it for folds or humidity.
  2. Adjust the paper guides to fit snugly against the paper stack without bending it.
  3. Clean the feed rollers using a lint-free cloth lightly dampened with water to restore grip.
  4. Power cycle the printer by unplugging it for 30 seconds to reset the detection logic.

Prevención y mantenimiento

Always use paper that meets Brother's weight specifications (64-220 g/m²). Keep the paper storage in a dry area to prevent curling. Clean the feed rollers every 6 months to maintain optimal paper intake performance.

Cuándo llamar a un técnico

If the error persists after cleaning and using fresh paper, the paper sensor flag may be physically broken or a component of the internal drive unit may be failing, requiring professional service.

Ficha técnica del equipo

  • Technology: Inkjet Color.
  • Speed: Up to 16 ppm (black) / 9 ppm (color).
  • Connectivity: Wi-Fi, USB 2.0.
  • Tray capacity: 150 sheets.
  • Compatible consumables: Brother LC406 / LC406XL series.
  • Recommended use: Home and small office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Physical check

    Remove the paper and check for debris.

  2. 2

    Guide adjustment

    Slide the guides until they touch the paper edges lightly.

  3. 3

    Roller cleaning

    Wipe the feed rollers with a moist cloth.

  4. 4

    Restart unit

    Turn off and back on to recalibrate sensors.

Frequently asked questions

It's not a critical hardware failure, but it is a functional issue. Most cases are fixed by simple cleaning.

If cleaning the rollers doesn't resolve it after a restart, the sensor hardware might be damaged.

This model uses the LC406 ink series, available in standard and XL high-yield versions.

Clean them every 6 months or whenever you notice the printer struggling to grab the first sheet.