no-paperhl-l2460dn
Brother HL-L2460DN No Paper Error Fix
The Brother HL-L2460DN no paper error signifies that the printer is unable to feed a sheet from the tray. This is almost always caused by worn or dusty rubber rollers failing to provide enough traction. This guide explains how to troubleshoot the feed system and clean your rollers for reliable operation.
1 views
Common causes
- 1Dirty Rollers: Paper lint blocking friction.
- 2Humidity: Sheets sticking together.
- 3Misaligned Guides: Tray guides not centered.
- 4Sensor Failure: Tray presence sensor stuck.
Solutions
Diagnóstico rápido
Error 'No Paper' happens when the pickup rollers spin but fail to grab the paper. If the tray is full, dust is likely insulating the rubber surface from the paper.Solución paso a paso
- Pull out the paper tray completely.
- Reach into the empty slot to find the rubber rollers.
- Wipe rollers with a lint-free damp cloth.
- Fan the paper stack to remove static.
- Slide the tray back in firmly.
Prevención y mantenimiento
Keep paper in a dry place to prevent sticking. Regularly clean rollers every few months to ensure they stay grippy. Avoid overloading the tray beyond the fill line.Cuándo llamar a un técnico
If cleaning the rollers does not solve the feed issue, the feed motor or internal sensor board may be malfunctioning.Ficha técnica del equipo
- Technology: Laser monochrome.
- Speed: 36 ppm.
- Connectivity: USB, Ethernet.
- Capacity: 250 sheets.
- Consumable: TN-2510 toner / DR-2510 drum.
- Recommended use: Small office.
- Official drivers / firmware
Steps to follow
- 1
Remove tray
Pull out the paper tray fully.
- 2
Clean rollers
Wipe the rubber feed rollers with a damp cloth.
- 3
Fan paper
Fan the paper stack to separate sheets.
- 4
Reinsert
Reload and close the tray.
Frequently asked questions
Dirty pickup rollers often lose friction and fail to grip the sheet.
Possibly, but most often it is simply a lack of grip on the rollers.
TN-2510 toner.
Keep paper dry and occasionally clean the rollers to prevent lint buildup.