Brother DCP-8155DN error no-paper Fix
The Brother DCP-8155DN error no-paper is a notification indicating that the printer tray is either empty or the pickup mechanism is failing. Users often ask why does my Brother DCP-8155DN show error no-paper, which commonly relates to sensor debris or worn feed rollers. This laser printer is built for reliability, but regular feeding maintenance is essential for avoiding this specific error code.
Common causes
- 1Accumulated paper dust on feed rollers.
- 2Misaligned paper guide in the main tray.
- 3Obstructed optical tray sensor.
- 4Damaged rubber on the pickup mechanism.
Solutions
Quick Diagnosis
If your tray contains paper but the error persists, check for small debris in the paper path or test if the tray is pushed in correctly.Step-by-Step Fix
- Remove the paper tray entirely.
- Adjust the paper guides snugly against the stack.
- Clean the feed rollers with a soft cloth to ensure grip.
- Reinsert the tray securely.
Prevention and Maintenance
Avoid using dusty or wrinkled paper. Use an official Brother maintenance kit to refresh the rubber rollers every 10k prints.When to Call a Technician
If the tray is seated properly and no debris is found, a faulty internal sensor may require replacement.Equipment Data Sheet
- Technology: Monochrome Laser.
- Performance: 42 ppm speed.
- Connectivity: Ethernet/USB/WiFi.
- Feeding capacity: 250 sheets standard.
- Compatible consumable: TN750/TN780 toner series.
- Recommended usage: High-volume offices.
- Official Drivers/Firmware
Steps to follow
- 1
Reload tray
Remove and reload paper checking alignment guides.
- 2
Clean rollers
Wipe rollers to restore traction.
- 3
Clear obstructions
Check the path for small paper scraps.
Frequently asked questions
It happens when the sensor fails to detect paper or the rollers are too dirty to grip the sheets.
Yes, printing will be blocked until the system detects paper in the tray.
Use standard 20lb bond paper for best reliability.
Clean rollers regularly and do not overfill the tray.