Network Error 0x98Epson WorkForce Pro WF-3820

Fix Network Error 0x98 on Epson WF-3820

Network error 0x98 on the Epson WF-3820 points to a communication failure between the printer and the local network. This is often triggered by IP conflicts, router configuration changes, or signal interference. Correcting the Wi-Fi settings is the standard approach to restore functionality.

1 views

Common causes

  • 1Changes to Wi-Fi password or router security settings.
  • 2IP address conflict with other devices on the LAN.
  • 3Weak wireless signal or distance from the access point.

Solutions

Network Hardware Reset

  1. Switch off the printer and unplug your internet router for 30 seconds.
  2. Power up the router and wait for all connection indicators to stabilize.
  3. Turn on the printer and verify if it auto-reconnects.

Steps to follow

  1. 1

    Navigate to Network Settings

    On the printer screen, tap Settings > Network Settings > Wireless Setup Wizard.

  2. 2

    Select 2.4GHz Network

    Choose your 2.4GHz network, as the WF-3820 relies on this band for reliable connections.

  3. 3

    Print Connection Report

    Verify the connection status by printing the Network Status Sheet directly from the printer menu.

Frequently asked questions

No, error 0x98 is network-specific. Wired USB connections remain unaffected.

The WF-3820 is designed for 2.4GHz bands to ensure better wall penetration and connection range.

Only if basic network troubleshooting fails, as it erases all customized preferences.

Fix Network Error 0x98 on Epson WF-3820 | Vimazdev