Network Connection LostHP OfficeJet Pro 8025

Fix Network Connection Lost on HP OfficeJet Pro 8025

The 'Network Connection Lost' error means the HP OfficeJet Pro 8025 cannot maintain a stable link with the wireless router. This disrupts cloud printing and scanning tasks. Assigning a static IP address is the most effective way to prevent frequent drops.

1 views

Common causes

  • 1Wireless interference on the 2.4GHz frequency band.
  • 2IP address conflicts within the local network.
  • 3Outdated firmware causing connection instability.

Solutions

Assigning a Static IP

  1. Enter the printer's current IP address in your computer's browser.
  2. Navigate to the 'Network' or 'Networking' tab.
  3. Change the IPv4 setting to 'Manual' or 'Static'.
  4. Enter a fixed IP address that falls outside your router's DHCP range.

Steps to follow

  1. 1

    Power Cycle

    Restart your router, wait for it to fully stabilize, then restart the printer.

  2. 2

    Check Wi-Fi Strength

    Ensure the printer signal strength is at least three bars via the control panel.

  3. 3

    Run Setup Wizard

    Use the built-in Wireless Setup Wizard to re-establish the connection from scratch.

Frequently asked questions

The router often reassigns IP addresses, causing the printer to lose its network path.

Absolutely. Wired connections avoid all Wi-Fi interference issues.

Only if basic network troubleshooting fails, as it erases your custom wireless settings.